My Opinion on Lifting Weights While Drinking Tea

A few days ago I came across a newbie to tea on Reddit's r/tea who was looking at purchasing a cast iron pot and wanted to know if we liked the one they were looking at as an intro pot for someone on a budget. I've seen quite a few posts on this subreddit about getting cast irons as a newbie to tea and know that Teavana does its absolute best to encourage all customers to get cast iron pots. I think this is a terrible idea. Here's my entire response which I spent so much time on I decided to use here as well:

"Don't get cast iron as an intro pot, especially if you're on a budget. You might like it for the idea that it won't break, but they're so inconvenient you'll never want to make tea with it. Here is a list of my complaints about cast iron teapots:

1. You'll have to boil your water twice if you're using a small electric kettle because you have to use the hot water to heat up the pot and cups once, and then to actually make your tea.
2. They're extremely heavy. Heavy to the point where it makes it very hard to pour and you'll be spilling almost always. Not to mention it dents everything because one cannot simply put down a cast iron teapot.
3. Rust. Rust. Rust. Rust. If you use it. It will rust. Especially if you're not a consistently quick drinker since I'm assuming you'll use this as your personal pot. I feel like cast irons are for people who actually put in a LOT of effort into their tea drinking and drink with a lot of people. I drink a LOT of tea. I drink tea all the time. However, just right now I've got a pot of tea from 2 hours ago sitting on my table waiting to be drunk (its not a very good tea...). If that was a cast iron pot I would have just pointlessly shortened that pot's life. Its ceramic, so it's fine. And even if you do drink out of it rather quickly, you'll still need to actually go in and dry it. You can't let it air dry because that'll also shorten its life. And you might be thinking, "well, it'll take a long time to rust so it'll be okay", but my ceramic pot will never rust, and it was much, much cheaper than any non-leaded cast iron will ever be.
4. Did I mention how heavy they are? I'm actually really strong. I just don't like lifting weights when making tea.
5. And I forgot to mention, but the handle gets ridiculously hot too.
6. Cast iron pots, or tetsubin as they're called, are Japanese. But in traditional Japan, they're not even for making tea. I have lived in Japan before. I have seen tea ceremonies. I have drunk tea many times there. I basically did my own personal tea tour of the country this last winter. I have never seen anyone in Japan use one for making tea. Its for boiling hot water over a fire pit. (Which I have seen in modern homes, my friend's place had one built into the dining table! It was awesome, but even they used a western stainless steel kettle on it, because tetsubin are very troublesome.)"

I am not actually against using tetsubin for tea simply because that's not what they're most convenient for. I don't have a huge thing against repurposing items. But even the glazed ones which are better (I say reluctantly) for making tea in can still rust because every older one I've seen has had cracked glaze with chunks missing (revealing rusted spots). Some people are diligent about taking care of their tetsubin, are big workout enthusiasts, and maybe they've burned out the nerves in their hands from handling too hot of things (I know a few people like this), but I just don't think that this should be someone's first tea pot. They're practically worse than yixing with how much attention you have to pay to them. Its really not too much work at all, but its more than most people are willing to put into their tea making, and therefore those kind of people should use something that won't be ruined by their tea making style which would make it harder for them to enjoy tea. Being able to make delicious tea is the true purpose of a teapot after all. What good is it if it can't do that? If there's something I don't like, its making something that can be used into an unused and lifeless decoration.

Coffee Floats and Tea Sinks? Where To Put Your Leaves?

"Coffee Floats and Tea Sinks" is apparently the title of some book, but it was a book about coffee, so I didn't bother looking at it much more than that on amazon.

Today, kind of like usual, I was looking around online for a nice Gongfu tea tray. Upon looking around, I found out that some people call it a "tea sink"! I started looking for one using those keywords, but came across something interesting about tea leaves sinking into the water instead.

Vicony Teas Tea Encyclopedia How to Brew Tea

I'd never heard of this before, but apparently there are 3 different methods of brewing tea concerning when you put the leaves in the water. Most of us use "Bottom-Putting Method" (下投法), but it appears that for green teas we should be either using "Middle-Putting Method" (中投法) or "Top-Putting Method" (上投法). What is the difference between these 3 methods? Well simply put, it has to do with where you put the leaves in the water.

For those of you who don't know, this can be important to consider because some leaf flavors are more sensitive to heat than other. My favorite tea, Gyokuro (a Japanese green) is a perfect example for what the different temperatures of water do to the flavors. Green tea in general likes water at about 175 F. Personally, I never like my greens at anything higher than 160F (unless it's Houjicha). When the water is too hot, it brings out a very disgusting bitter taste in green tea. When the water temperature is correct, you will taste sweeter, grassier, more flowery and vegetal flavors instead (unless your tea is either crap or too old). About every 5-10 degrees between 35F and 140F (the highest I'll ever go with Gyokuro), you will notice a difference in the flavor of Gyokuro. Why? Because different chemical components of the leaf are being pulled out (lower temperature= more L-theanine, less caffeine) and the temperature also highlights different flavors too. Ever notice how American beer tastes like crap at room temperature, but the Germans think we're insane for drinking beer cold? Or how ice cream is way too sweet when warm?

As I tried to imply with Bottom-Putting Method (henceforth BPM), this is where you put the leaves in before putting the water on top. This is what most Americans use, probably because we're so used to doing dry ingredients before wet ones when baking. You're really never supposed to do this with green tea because that's too harsh on the delicately steamed leaves (or pan fried if they're Chinese). This source seems to suggest that you shouldn't really do that with any type of good quality tea, but I guess I'll have to do an experiment with that using pu-erh and oolong (I don't have any black teas) and see if there's any reason to fuss about that with the hardier, more oxidized teas.

Middle-Putting Method (MPM), seems pretty interesting to me. In this method, the source says to fill the brewing container about 1/4th of the way with water at brewing temperature. Then you need to put the leaves on top of that and let them soak a little until they start to float down (vessel may be shaken slightly). Finally you fill the rest of the vessel with brewing water and then wait until the leaves fall to the bottom (it suggests that if they don't then your water is too cool, but that appears to be partially because it looks like they're suggesting drinking "Grandpa style") and then wait for it to brew (about a min or so) and only then drink. This is suggested for Chinese greens like Longjing (Dragon Well) and Huang Shan Mao Feng (Yellow Mountain Fur Peak) with are both delicious.

Top-Putting Method (TPM) is where you put the leaves on top of the brewing water. They recommend this for even more delicate teas like white teas apparently (they say Bi Luo Chun, but I haven't ever had this one or seen it before which isn't surprising because I'm not typically a white tea person).

I'm curious to see if these really do make an impact on flavor. For more delicate teas for sure, I would imagine that they do, but I'd like to try it out for myself too. If any of you have experience with this as well, or know anything more, please feel free to comment on this post!

On a more personal note, I'm down to my last 5 grams of my absolute favorite 2898!!!!!!!!!!! Oh my goodness. When you get a new brick, it looks like it'll last you forever, but I'm down to the last tippy little corner now, and in another 2 hours or so it'll be gone. I'll possibly post something in it's memory. Hahaha. But funnily enough, getting a larger gaiwan and hand strainer has really increased my tea consumption. I had nearly 50 grams still left a month ago when I came back to Seattle from Mount Holyoke. Hahaha. Oh well. I've loved every drop of it!